Hybrid PCB Board
Hybrid PCB is a multilayer printed circuit board with dissimilar material for each layer. This type of PCB is usually developed to optimize electrical performance of the system where PCB will be installed. Using correct combination of substrates leads to improvement in the reliability of a printed circuit board.
More Information
|
Hybrid PCB Board |
|
|
Item |
Capability |
|
Layer Count |
1-40layers |
|
Base Material |
KB、Shengyi、ShengyiSF305、FR408、FR408HR、IS410、FR406、GETEK、370HR、IT180A、Rogers4350B、Rogers4000、PTFE Laminates(Rogers series、Taconic series、Arlon series、Nelco series)、Rogers/Taconic/Arlon/Nelco laminate with FR-4 material(including partial Ro4350B hybrid laminating with FR-4) |
|
Board Type |
Backplane、HDI、High multi-layer 、blind&buried PCB、Embedded Capacitance、Embedded resistance board 、Heavy copper power PCB、Backdrill. |
|
Board Thickness |
0.2-5.0mm |
|
Copper Thickness |
Min. 1/2 OZ, Max. 10 OZ |
|
PTH Wall |
25um(1mil) |
|
Maximum Board Size |
1100*500mm(43”*19”) |
|
Min laser drilling size |
4mil |
|
Min. Spacing/Tracing |
2.7mil/2.7mil |
|
Solder Mask |
Green, Black, Blue, Red, White, Yellow, Purple matte/glossy |
|
Surface Treatment |
Flash gold(electroplated gold)、ENIG、Hard gold、Flash gold、HASL Lead-free 、OSP、ENEPIG、Soft gold、Immersion silver、Immersion Tin、ENIG+OSP, ENIG+Gold finger, Flash gold(electroplated gold)+Gold finger, Immersion silver+Gold finger, Immersion Tin+Gold finger. |
|
Min. Annular Ring |
3mil |
|
Aspect ratio |
10:1(HASL Lead-free 、HASL Lead、ENIG、Immersion Tin、Immersion silver、ENEPIG);8:1(OSP) |
|
Impedance control |
±5ohm(＜50ohm), ±10%(≥50ohm) |
|
Other Techniques |
Blind/Buried Via |
|
Gold Fingers |
|
|
Press Fit |
|
|
Via in Pad |
|
|
Electrical Test |
|