Leaded Solder Core Wire
All ‘Asahi’ solder are manufactured using the highest quality raw materials available. As the electronics industry imposes very stringent demands on the quality of soldering materials, Asahi uses only Virgin Grade materials to produce solder products that exceed International Industrial Specifications requirement.
More Information
|
FC5000/FC5005 gives a non-corrosive, minimal, clear yellow tinted residue due to which exhibits excellent electrical and thermal insulation properties. Properties Halide Content: Not Added Flux Activity Classification: ROL0 Residue Appearance; Light Yellowish Residue Removal: Not Required Available Alloys SnPb Diameter (mm) 0.25mm~1.6mm, solid 2.0mm & 3.0mm |
|
CF10/CF10A are an activated rosin formula for use in flux-core solder wire. This cored flux exhibits the so-called “instant action” wetting behavior. The high mobility and fast spreading action of this flux result in fast production line soldering. Properties Halide Content: 0.7 / 0.45 wt% Flux Activity Classification: ROH 1 Residue Appearance: Light Yellowish Residue Removal: Not Required Available Alloys SnPb Diameter (mm) 0.25mm~1.6mm, solid 2.0mm & 3.0mm |
|
AMX-66 core solder wire is specially formulated for high temperature soldering. The residue is non-corrosive and exhibits excellent electrical and thermal insulation properties. Properties Halide Content : 0.40 wt% Flux Activity Classification: ROM 1 Residue Appearance: Light Yellowish Residue RemovalL: Not Required Available Alloys Sn10Pb88Ag2 Diameter (mm) 0.5mm~1.6mm and solid 2.0mm |
|
CF60 gives a non-corrosive, minimal, clear yellow tinted residue due which exhibits excellent electrical and thermal insulation properties. Sn63Pb37 CF60 is highly recommended for use in the no-clean process environment, thus eliminating the cost of cleaning. Properties Halide Content: Not Added Flux Activity Classification: ROL0 Residue Appearance: Light Yellowish Residue Removal: Not Required Available Alloys Sn63Pb37, Sn60Pb40 Diameter (mm) 0.5mm~1.6mm and solid 2.0mm |
|
C6 is a highly activated water soluble core flux for soldering on difficult to solder surface finishes. It is easily cleaned along with minimal odor and smoke. Properties Halide Content: 1 wt% Flux Activity Classification: ROH 1 Residue Appearance: Light Yellowish Residue Removal: Rinse with DI water at 40°C – 60°C Available Alloys Sn63Pb37, Sn60Pb40 Diameter (mm) 0.25mm~1.6mm, solid 2.0mm & 3.0mm |